Thursday, November 19th, 2026

now browsing by day

 

Why Adding More Powder Coating Makes Pinholes Worse (And What Actually Works)

A few years ago, a job shop running die-cast aluminum parts had a rejection rate hovering around 30% because of pinholes. The first instinct on the floor was predictable: spray a heavier coat. If the pinholes are breaking through the surface, put down more powder and bury them. That instinct is almost always wrong. On thick-film powder coatings, adding material does not hide the defect—it multiplies it. The reason sits at the intersection of substrate chemistry and film physics, andRead More …